MagTec Alaska

Checking sign-in…

Job Setup:Set once. Attaches to every form you submit.
← Back to Portal

Wire Rope Monthly Inspection

Monthly Inspection per ASME B30.9 / API RP 9B

30-DAY INSPECTION TRACKING
🔩 Wire rope must be removed from service if: 6 or more broken wires in one rope lay, 3 or more broken wires in one strand, core protrusion, kinking/birdcaging, diameter reduction >5%, or evidence of heat damage/corrosion affecting structural integrity.
📋 Inspection Information
🔩 Wire Rope Information
✓ Inspection Checklist
Identification & Documentation
Rope identification tag present
Pass
Fail
N/A
Service records available
Pass
Fail
N/A
Install date documented
Pass
Fail
N/A
General Condition
No visible corrosion or rust
Pass
Fail
N/A
No kinking or bird-caging
Pass
Fail
N/A
No crushing or flattening
Pass
Fail
N/A
No heat damage or discoloration
Pass
Fail
N/A
Proper lubrication present
Pass
Fail
N/A
No excessive dirt or debris
Pass
Fail
N/A
Wire Breaks
No broken wires in one rope lay
Pass
Fail
N/A
No broken wires at end connections
Pass
Fail
N/A
No valley breaks visible
Pass
Fail
N/A
No cluster breaks (multiple adjacent)
Pass
Fail
N/A
Diameter & Stretch
Diameter within tolerance
Pass
Fail
N/A
No excessive stretch/elongation
Pass
Fail
N/A
Core not protruding
Pass
Fail
N/A
End Connections
Clips properly installed (if used)
Pass
Fail
N/A
Spelter sockets intact
Pass
Fail
N/A
Swaged fittings not cracked
Pass
Fail
N/A
Thimbles not worn or distorted
Pass
Fail
N/A
No slippage at terminations
Pass
Fail
N/A
Drums & Sheaves
Rope tracking properly on drum
Pass
Fail
N/A
Sheave grooves not excessively worn
Pass
Fail
N/A
No rope jumping from sheaves
Pass
Fail
N/A
Operating Environment
Protected from damaging elements
Pass
Fail
N/A
Proper fleet angle maintained
Pass
Fail
N/A
📊 Overall Result
Pass
Requires Monitoring
Fail
Removed from Service
📝 Findings & Actions
AnthroSafe™ Field Driven Safety
© 2026 SLP Alaska, LLC
Home / Inicio